eosl.ai
homeJuniperM/MX SeriesMX2008

Juniper M/MX Series MX2008 — End-of-Life & EOSL Dates

UNDER VENDOR SUPPORTJuniper supports this to September 2031.

Juniper M/MX Series MX2008 — router. Published end-of-sale (last order) and end-of-support (EOSL) dates from Juniper JTAC End-of-Life bulletins.

Juniper M/MX Series MX2008 is still under Juniper support, to Sep 2031. Fold the eventual replacement into your planning cycle.

End of sale

Sep 2026

Last date of support

Sep 2031

Part numbers

10

Check your part numbers in bulk Add to calendar

61

months of vendor support left

Support Runway Score87/100 · Watch
Why this score
  • Supported, with more than 3 years of runway
  • Vendor-published date, source-linked
  • Category: router

Support-lifecycle timing and source confidence only. Higher means more runway. It is not a risk, safety or compliance rating. How it is calculated

Figure 1. Support runs to Sep 2031. Budget a refresh or line up cover before that date.
Figure 2. The MX2008 against 7 other models in Juniper M/MX Series. Each bar runs from the earliest milestone Juniper publishes for that model, which is first availability where it gives one and end of sale otherwise, to its last date of support. The vertical rule is today; bars entirely to its left are past support.

Part numbers in this family

All 10 share the dates above. Find your exact part to confirm.

Part numberDescriptionEnd of saleLast supportStatus
MX2008-BASEMX2008 routerSep 2026Sep 2031Supported
MX2008-CHAS-PKG-SMX2008 routerSep 2026Sep 2031Supported
MX2008-CRAFT-SMX2008 routerSep 2026Sep 2031Supported
MX2008-FLTR-KIT-SMX2008 routerSep 2026Sep 2031Supported
MX2008-PREMIUMMX2008 routerSep 2026Sep 2031Supported
MX2008-SFB2-BBMX2008 routerSep 2026Sep 2031Supported
MX2008-SFB2-RMX2008 routerSep 2026Sep 2031Supported
MX2008-SFB2-SMX2008 routerSep 2026Sep 2031Supported
MX2008-RE-BLANK-SMX2008 routerSep 2026Sep 2031Supported
MX2008-MNT-TRAY-SMX2008 routerSep 2026Sep 2031Supported

Options from here

The Juniper M/MX Series MX2008 is still supported. Options to plan around, in rough priority:

Monitor the timeline

Supported for now. Track the end-of-service date and revisit at refresh planning.

Plan the refresh

Fold the eventual replacement into your multi-year budget.

Keep firmware current

Stay on a supported software train while under OEM support.

Third-party maintenance later

An option to extend life once the OEM cutoff nears.

Independent and informational. EOSL.ai sells no hardware and no maintenance, and lists no paid placements. Third-party maintenance keeps unsupported gear in production past the OEM cutoff; whether it fits depends on the role the asset plays.

M/MX Series MX2008 — questions

Is the Juniper M/MX Series MX2008 end of life?

Not yet. All tracked MX2008 SKU groups are still within Juniper support, though dates vary by SKU. See the breakdown below.

What is the last date of support for the MX2008?

Sep 2031, per the Juniper end-of-sale bulletin.

Where do these MX2008 dates come from?

Every end-of-sale and end-of-service-life date on this page links to the official Juniper end-of-sale bulletin it was taken from.

More Juniper M/MX Series · compare all 21 models →

On the same timetable

Embed this status on your wiki or README

A live badge that shows this model's support status and links here — it refreshes when the vendor date changes.

Juniper M/MX Series MX2008 EOL / EOSL status
<a href="https://eosl.ai/system/juniper-mx2008/"><img src="https://eosl.ai/badge/juniper-mx2008.svg" alt="Juniper M/MX Series MX2008 EOL / EOSL status"></a>
[![Juniper M/MX Series MX2008 EOL / EOSL status](https://eosl.ai/badge/juniper-mx2008.svg)](https://eosl.ai/system/juniper-mx2008/)